Dome E3,Open Architecture Support .DICOM Calibrated

Dome E3
Open Architecture Support .DICOM Calibrated

The Dome E3 grayscale display is intended for diagnostic imaging for CT, MR, CR, DR, and nuclear and can be used in both portrait and landscape modes. The new Dome E3 display supports an open architecture design which allows users to gain access to state-of-the-art graphics standards, providing the capability of high-speed 3D and volumetric rendering for navigation and visualization functionality. Dome CXtra Software provides full DICOM conformance testing capabilities, reporting, and remote management, making this an ideal display for your PACS system.

Features:

*	3 megapixel display
*	3061 unique shades of gray
*	700:1 contrast ratio
*	800 cd/m² brightness
*	Automatic DICOM calibration
*	Dual Channel DVI (Dual Link)

Specifications:

LCD Display
Technology	TFT AMLCD Dual Domain IPS with Advanced Fringe Field Switching, 3 subpixels per pixel
Screen Size (diagonal)	20.8-inch (528.3 mm)
Display Resolution (pixels)	1536 x 2048 portrait, 2048 x 1536 landscape
Pixel Pitch	207µm, 123 dpi
Viewing Angle (CR 10:1)	± 85° (170°) horizontal and vertical
Response Time	35 ms typical
Optical Characteristics
Brightness	800 cd/m² typical
Contrast Ratio	700:1 typical
Palette	3061 unique shades of gray
DICOM Calibration	Callibration continually verified by Dome Cxtra™
Panel Interface/Connectivity
Digital Video Input	Dual Channel DVI (Dual Link)
Analog Video Input	Not Applicable
Digital Communication & ID	DDC2B+EDID
USB Interface	Built-in USB1.1 Hub, One upstream port, two downstream ports
Video Input Formats
Landscape Orientation	2048 x 1536, 8-bit and 24-bit per pixel
Portrait Orientation	1536 x 2048, 8-bit and 24-bit per pixel
VGA to XGA/SXGA	640 x 480 to 1024 x 768, 1280 x 1024 displayed portrait and landscape
Calibration
Technique	LCD panel individually characterized and calibrated at factory, DICOM calibration verfication performed via RightLight™ (internal photometer) and Dome CXtra
Test Standards	AAPM TG18 Report No. 03, DIN 6868-57:2000
Calibration Type	DICOM Grayscale, 256 shades of gray
Imaging/Graphics Controller
Compatible Controller Support	DX2, MX3, AX5, NX1500 Specifications (pdf)
Physical Characteristics
Display Size (without stand) H x Wx D	18.7" x 14.5" x 4" (475 mm x 368 mm x 96 mm)
Weight (without stand)	14 lbs (6.35 kg)
Mounting Options	Compatible with 100 mm VESA-compliant mounting standards
Power Requirements
Power Input	100 to 240 VAC, Frequency of 50-60 Hz single phase, Less than 75 watts (typical)
Environmental
Operating Temperature Range	10 to 40 degrees C
Certifications
Medical	FDA 510(k)
Safety & Emission	CSA, EN60601, EN55011 (FCC Class B), CE, CCC, VCCI, MIC
Service and Support
Warranty	1-year standard warranty, extended warranty plans available.