All Displays
Dome E2 Monitor
Dome E3 Monitor
Dome E5 Monitor
Dome E2c Monitor
Dome E3c Monitor
Dome E4c Monitor
Dome GX2MP Monitor
Dome GX40 Monitor
White Papers & Case Studies
Dome E3
Open Architecture Support. DICOM Calibrated.
The Dome E3 grayscale display is intended for diagnostic imaging for CT, MR, CR, DR, and nuclear and can be used in both portrait and landscape modes. The Dome E3 display supports an open architecture design which allows users to gain access to state-of-the-art graphics standards, providing the capability of high-speed 3D and volumetric rendering for navigation and visualization functionality. Dome CXtra Software provides full DICOM conformance testing capabilities, reporting, and remote management, making this an ideal display for your PACS system.
Features:
- 3 megapixel display
- 3061 unique shades of gray
- 700:1 contrast ratio
- 800 cd/m2 brightness
- Dual Channel DVI (Dual Link)
| LCD Display | |
| Technology | TFT AMLCD Dual Domain IPS with Advanced Fringe Field Switching, 3 subpixels per pixel |
| Screen Size (diagonal) | 20.8-inch (528.3 mm) |
| Display Resolution (pixels) | 1536 x 2048 portrait, 2048 x 1536 landscape |
| Pixel Pitch | 207µm, 123 dpi |
| Viewing Angle (CR 10:1) | ± 85° (170°) horizontal and vertical |
| Response Time | 35 ms typical |
| Optical Characteristics | |
| Brightness | 800 cd/m² typical |
| Contrast Ratio | 700:1 typical |
| Palette | 3061 unique shades of gray |
| DICOM Calibration | Callibration continually verified by Dome Cxtra™ |
| Panel Interface/Connectivity | |
| Digital Video Input | Dual Channel DVI (Dual Link) |
| Analog Video Input | Not Applicable |
| Digital Communication & ID | DDC2B+EDID |
| USB Interface | Built-in USB1.1 Hub, One upstream port, two downstream ports |
| Video Input Formats | |
| Landscape Orientation | 2048 x 1536, 8-bit and 24-bit per pixel |
| Portrait Orientation | 1536 x 2048, 8-bit and 24-bit per pixel |
| VGA to XGA/SXGA | 640 x 480 to 1024 x 768, 1280 x 1024 displayed portrait and landscape |
| Calibration | |
| Technique | LCD panel individually characterized and calibrated at factory, DICOM calibration verfication performed via RightLight™ (internal photometer) and Dome CXtra |
| Test Standards | AAPM TG18 Report No. 03, DIN 6868-57:2000 |
| Calibration Type | DICOM Grayscale, 256 shades of gray |
| Imaging/Graphics Controller | |
| Compatible Controller Support | DX2, MX3, AX5, NX1500 Specifications (pdf) |
| Physical Characteristics | |
| Display Size (without stand) H x Wx D | 18.7" x 14.5" x 4" (475 mm x 368 mm x 96 mm) |
| Weight (without stand) | 14 lbs (6.35 kg) |
| Mounting Options | Compatible with 100 mm VESA-compliant mounting standards |
| Power Requirements | |
| Power Input | 100 to 240 VAC, Frequency of 50-60 Hz single phase, Less than 75 watts (typical) |
| Environmental | |
| Operating Temperature Range | 10 to 40 degrees C |
| Certifications | |
| Medical | FDA 510(k) |
| Safety & Emission | CSA, EN60601, EN55011 (FCC Class B), CE, CCC, VCCI, MIC |
| Service and Support | |
| Warranty | 1-year standard warranty, extended warranty plans available. |
To purchase Dome E3 Display please call us 1-800-938-SCAN or email us sales@cadcam.org.
